{"title":"Woodfire Stoves","description":"\u003cp\u003eWoodfire makes wood-only boiler stoves that heat radiators and hot water as well as the room. We list 11: the EX10, EX12 Panorama, EX15, EX17 Panorama and EX22 inset stoves from 9.9kW to 21.8kW, including a double sided EX12, and the freestanding CX8, CXC8 and Passiv. Every one carries an Ecodesign rating.\u003c\/p\u003e\u003cdiv class=\"gf-guide\"\u003e\n\u003ch2\u003eThe Woodfire range\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eTotal\u003c\/th\u003e\n\u003cth\u003eTo water \/ room\u003c\/th\u003e\n\u003cth\u003eEfficiency\u003c\/th\u003e\n\u003cth\u003eFlue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCX8\u003c\/td\u003e\n\u003ctd\u003eFreestanding\u003c\/td\u003e\n\u003ctd\u003e8kW\u003c\/td\u003e\n\u003ctd\u003e5.4 \/ 2.6kW\u003c\/td\u003e\n\u003ctd\u003e76%\u003c\/td\u003e\n\u003ctd\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCXC8\u003c\/td\u003e\n\u003ctd\u003eFreestanding\u003c\/td\u003e\n\u003ctd\u003e8kW\u003c\/td\u003e\n\u003ctd\u003e5.3 \/ 2.7kW\u003c\/td\u003e\n\u003ctd\u003e76%\u003c\/td\u003e\n\u003ctd\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePassiv\u003c\/td\u003e\n\u003ctd\u003eFreestanding\u003c\/td\u003e\n\u003ctd\u003e4 to 10kW\u003c\/td\u003e\n\u003ctd\u003eabout 7 \/ 3kW\u003c\/td\u003e\n\u003ctd\u003e85.8%\u003c\/td\u003e\n\u003ctd\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEX10\u003c\/td\u003e\n\u003ctd\u003eInset\u003c\/td\u003e\n\u003ctd\u003e9.9kW\u003c\/td\u003e\n\u003ctd\u003e8.5 \/ 1.4kW\u003c\/td\u003e\n\u003ctd\u003e84%\u003c\/td\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEX12 Panorama\u003c\/td\u003e\n\u003ctd\u003eInset\u003c\/td\u003e\n\u003ctd\u003e11.9kW\u003c\/td\u003e\n\u003ctd\u003e7.5 \/ 4.4kW\u003c\/td\u003e\n\u003ctd\u003e81%\u003c\/td\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEX12 Panorama Double Sided\u003c\/td\u003e\n\u003ctd\u003eInset, see-through\u003c\/td\u003e\n\u003ctd\u003e12.5kW\u003c\/td\u003e\n\u003ctd\u003e6.5 \/ 6.0kW\u003c\/td\u003e\n\u003ctd\u003e85%\u003c\/td\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEX15\u003c\/td\u003e\n\u003ctd\u003eInset\u003c\/td\u003e\n\u003ctd\u003e14.9kW\u003c\/td\u003e\n\u003ctd\u003e12.5 \/ 2.4kW\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEX17 Panorama\u003c\/td\u003e\n\u003ctd\u003eInset\u003c\/td\u003e\n\u003ctd\u003e16.8kW\u003c\/td\u003e\n\u003ctd\u003eabout 10 \/ 6.8kW\u003c\/td\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEX22\u003c\/td\u003e\n\u003ctd\u003eInset\u003c\/td\u003e\n\u003ctd\u003e21.8kW\u003c\/td\u003e\n\u003ctd\u003e18.5 \/ 3.3kW\u003c\/td\u003e\n\u003ctd\u003e82%\u003c\/td\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing a Woodfire stove\u003c\/h2\u003e\n\u003cp\u003eStart with the heat you need in water for radiators and hot water, worked out by a heating engineer, then check the room output suits the room. The EX10 and EX15 send most of their heat to water; the Panorama models put more into the room through a wide landscape door and take logs up to 600mm.\u003c\/p\u003e\n\u003ch2\u003ePanorama models\u003c\/h2\u003e\n\u003cp\u003eThe EX12 and EX17 Panorama have a wide landscape door that shows more of the fire and takes logs up to 600mm long, so you split and load less often. Both are offered one sided or double sided, and the EX12 Panorama Double Sided is listed separately at 12.5kW and 85% efficiency.\u003c\/p\u003e\n\u003ch2\u003ePlanning a boiler stove\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA heating engineer designs the water side: system type, heat leak, pump and safety controls. LK load units and flue thermostats are in \u003ca href=\"\/collections\/indoor-heating-accessories\"\u003estove accessories\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eInset models need a builder's opening to the manual's dimensions and a 200mm flue.\u003c\/li\u003e\n\u003cli\u003eInstallation is by a HETAS-registered installer or signed off by Building Control, with a carbon monoxide alarm in the room.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFreestanding or inset?\u003c\/h2\u003e\n\u003cp\u003eThe CX8, CXC8 and Passiv stand on a hearth in the room and suit an existing fireplace or a stove alcove. The EX models are built into the wall for a flush finish and suit a new build, extension or full fireplace renovation.\u003c\/p\u003e\n\u003ch2\u003eFuel\u003c\/h2\u003e\n\u003cp\u003eAll Woodfire stoves listed burn wood only. Use logs with less than 20% moisture to protect the water jacket and flue from tar. The versions listed are not exempt for smoke control areas.\u003c\/p\u003e\n\u003cp\u003eCompare in \u003ca href=\"\/collections\/boiler-stove\"\u003eboiler stoves\u003c\/a\u003e, \u003ca href=\"\/collections\/inset-stoves\"\u003einset stoves\u003c\/a\u003e and \u003ca href=\"\/collections\/double-sided-fireplace\"\u003edouble sided stoves\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv class=\"gf-desc-faq\"\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003ch3\u003eAre Woodfire stoves boiler stoves?\u003c\/h3\u003e\n\u003cp\u003eYes. Every Woodfire stove we list heats water for radiators and hot water as well as the room.\u003c\/p\u003e\n\u003ch3\u003eCan Woodfire stoves burn coal?\u003c\/h3\u003e\n\u003cp\u003eNo. They are wood-only stoves.\u003c\/p\u003e\n\u003ch3\u003eWhat flue does a Woodfire EX stove need?\u003c\/h3\u003e\n\u003cp\u003eThe EX inset models need a 200mm flue. The CX8, CXC8 and Passiv use 150mm.\u003c\/p\u003e\n\u003ch3\u003eIs there a double sided Woodfire stove?\u003c\/h3\u003e\n\u003cp\u003eYes. The EX12 Panorama is available double sided, rated 12.5kW with 6.5kW to water and 6.0kW to the rooms.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"woodfire-cx8-contemporary-boiler-stove","title":"Woodfire CX8 Contemporary Wood Burning Boiler Stove","description":"\u003cp\u003eThe Woodfire CX8 is a contemporary, freestanding, wood-only boiler stove rated at 8kW. About 5.4kW goes to water for radiators and hot water and 2.6kW into the room, at 76% efficiency, so it suits well insulated or airtight homes.\u003c\/p\u003e\u003ch2\u003eWhy choose the Woodfire CX8\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e8kW nominal output: 5.4kW to water and 2.6kW to the room.\u003c\/li\u003e\n\u003cli\u003eCompact body: 870mm high, 520mm wide and 440mm deep.\u003c\/li\u003e\n\u003cli\u003eCan take its combustion air through a 100mm external air duct.\u003c\/li\u003e\n\u003cli\u003eSuitable for vented and pressurised heating systems.\u003c\/li\u003e\n\u003cli\u003eEcodesign compliant according to the Woodfire CX manual.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWill it suit your space?\u003c\/h2\u003e\u003cp\u003eAbout 2.6kW reaches the room directly. As a rule of thumb, an average room needs roughly 1kW for every 14 cubic metres, so that 2.6kW suits about 36 cubic metres (around 15 square metres with a 2.4m ceiling). Older, draughty or high-ceilinged rooms need more, and a heat-loss check by your installer gives the right answer.\u003c\/p\u003e\u003cp\u003eThe CX8 weighs 130kg and takes logs up to 330mm long. Woodfire sets a maximum recommended flue diameter of 160mm, and the stove is not suitable for a shared chimney.\u003c\/p\u003e\u003cdiv class=\"gf-desc-specs\"\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eWoodfire CX8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e8kW nominal (5.4kW to water, 2.6kW to room)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEfficiency\u003c\/th\u003e\n\u003ctd\u003e76%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFuel\u003c\/th\u003e\n\u003ctd\u003eWood only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (H x W x D)\u003c\/th\u003e\n\u003ctd\u003e870 x 520 x 440mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e130kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlue\u003c\/th\u003e\n\u003ctd\u003e150mm, top outlet (maximum recommended flue 160mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal air supply\u003c\/th\u003e\n\u003ctd\u003e100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum log length\u003c\/th\u003e\n\u003ctd\u003e330mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e2.5 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eFreestanding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years with a load unit (1 year without)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003c\/div\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eIt must be installed by a HETAS-registered installer or signed off by Building Control, and a carbon monoxide alarm is required in the room.\u003c\/p\u003e\u003cp\u003eThe boiler circuit should be designed and connected by a competent heating engineer. The CX8 is not suitable for a shared chimney.\u003c\/p\u003e\u003cdiv class=\"gf-desc-faq\"\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003ch3\u003eHow much heat does the CX8 give to the room?\u003c\/h3\u003e\n\u003cp\u003eAbout 2.6kW to the room and 5.4kW to water from an 8kW nominal output.\u003c\/p\u003e\n\u003ch3\u003eDoes it need a flue and a load unit?\u003c\/h3\u003e\n\u003cp\u003eYes. It needs a 150mm flue suitable for solid fuel, and Woodfire requires a load unit or load valve with the pump controlled by a flue thermostat or controller. Without a load unit the warranty drops from three years to one.\u003c\/p\u003e\n\u003ch3\u003eCan it go on a pressurised heating system?\u003c\/h3\u003e\n\u003cp\u003eYes. Firepower lists it as suitable for vented and pressurised systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eCompare it with the \u003ca href=\"\/products\/woodfire-cxc8-contemporary-boiler-stove\"\u003eWoodfire CXC8\u003c\/a\u003e, or see all \u003ca href=\"\/collections\/boiler-stove\"\u003eboiler stoves\u003c\/a\u003e and the \u003ca href=\"\/products\/lk-810-thermomat-2-0g-load-unit\"\u003eLK 810 load unit\u003c\/a\u003e.\u003c\/p\u003e","brand":"Woodfire","offers":[{"title":"Default Title","offer_id":43290083197182,"sku":"10008979","price":2199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/4037\/1710\/products\/WoodfireCX12-min.jpg?v=1665871100"},{"product_id":"woodfire-cxc8-contemporary-boiler-stove","title":"Woodfire CXC8 Contemporary Wood Burning Boiler Stove","description":"\u003cp\u003eThe Woodfire CXC8 is a freestanding, wood-only boiler stove rated at 8kW, sending about 5.3kW to water and 2.7kW into the room. It shares its working parts with the Woodfire CX8 in a different body style, and suits well insulated or airtight homes where most heat is wanted in the radiators and hot water.\u003c\/p\u003e\u003ch2\u003eWhy choose the Woodfire CXC8\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e8kW nominal output: 5.3kW to water and 2.7kW to the room.\u003c\/li\u003e\n\u003cli\u003eSame engine as the CX8 in a different body style.\u003c\/li\u003e\n\u003cli\u003e150mm top flue and a 100mm external air supply connection.\u003c\/li\u003e\n\u003cli\u003eSuitable for vented and pressurised heating systems.\u003c\/li\u003e\n\u003cli\u003eEcodesign compliant according to the Woodfire CX manual.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWill it suit your space?\u003c\/h2\u003e\u003cp\u003eAbout 2.7kW reaches the room directly. As a rule of thumb, an average room needs roughly 1kW for every 14 cubic metres, so that 2.7kW suits about 38 cubic metres (around 16 square metres with a 2.4m ceiling). Older, draughty or high-ceilinged rooms need more, and a heat-loss check by your installer gives the right answer.\u003c\/p\u003e\u003cp\u003eThe CXC8 is 520mm wide and 440mm deep, weighs 130kg and takes logs up to 330mm long. Woodfire sets a maximum recommended flue diameter of 160mm, and the stove is not suitable for a shared chimney.\u003c\/p\u003e\u003cdiv class=\"gf-desc-specs\"\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eWoodfire CXC8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e8kW nominal (5.3kW to water, 2.7kW to room)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEfficiency\u003c\/th\u003e\n\u003ctd\u003e76%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFuel\u003c\/th\u003e\n\u003ctd\u003eWood only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D)\u003c\/th\u003e\n\u003ctd\u003e520 x 440mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e130kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlue\u003c\/th\u003e\n\u003ctd\u003e150mm, top outlet (maximum recommended flue 160mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal air supply\u003c\/th\u003e\n\u003ctd\u003e100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum log length\u003c\/th\u003e\n\u003ctd\u003e330mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e2.5 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eFreestanding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years with a load unit (1 year without)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003c\/div\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eIt must be installed by a HETAS-registered installer or signed off by Building Control, and a carbon monoxide alarm is required in the room.\u003c\/p\u003e\u003cp\u003eThe boiler circuit should be designed and connected by a competent heating engineer. The CXC8 is not suitable for a shared chimney.\u003c\/p\u003e\u003cdiv class=\"gf-desc-faq\"\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003ch3\u003eHow much heat does the CXC8 give to the room?\u003c\/h3\u003e\n\u003cp\u003eAbout 2.7kW to the room and 5.3kW to water from an 8kW nominal output.\u003c\/p\u003e\n\u003ch3\u003eDoes it need a flue and a load unit?\u003c\/h3\u003e\n\u003cp\u003eYes. It needs a 150mm flue suitable for solid fuel, and Woodfire requires a load unit or load valve with the pump controlled by a flue thermostat or controller. Without a load unit the warranty drops from three years to one.\u003c\/p\u003e\n\u003ch3\u003eCan it go on a pressurised heating system?\u003c\/h3\u003e\n\u003cp\u003eYes. Firepower lists it as suitable for vented and pressurised systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eCompare it with the \u003ca href=\"\/products\/woodfire-cx8-contemporary-boiler-stove\"\u003eWoodfire CX8\u003c\/a\u003e, or see all \u003ca href=\"\/collections\/boiler-stove\"\u003eboiler stoves\u003c\/a\u003e and \u003ca href=\"\/collections\/wood-burning-stove\"\u003ewood burning stoves\u003c\/a\u003e.\u003c\/p\u003e","brand":"Woodfire","offers":[{"title":"Default Title","offer_id":43290134216958,"sku":"10008978","price":2499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/4037\/1710\/products\/WoodfireCXC12-min.jpg?v=1665871102"},{"product_id":"woodfire-passiv-boiler-stove","title":"Woodfire Passiv Wood Burning Boiler Stove","description":"\u003cp\u003eThe Woodfire Passiv is a freestanding, wood-only boiler stove designed to put most of its heat into water. Across its 4 to 10kW range it gives about 7kW to water and 3kW to the room, at 85.8% efficiency, which suits well insulated and low energy homes.\u003c\/p\u003e\u003ch2\u003eWhy choose the Woodfire Passiv\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e4 to 10kW output range: about 7kW to water and 3kW to the room.\u003c\/li\u003e\n\u003cli\u003e85.8% efficiency, and Ecodesign compliant according to Woodfire's brochure.\u003c\/li\u003e\n\u003cli\u003eHeat safety coil and external air connection fitted as standard.\u003c\/li\u003e\n\u003cli\u003eCan be connected to pressurised or open vented systems.\u003c\/li\u003e\n\u003cli\u003e150mm flue with a 100mm external air supply connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWill it suit your space?\u003c\/h2\u003e\u003cp\u003eAround 3kW reaches the room directly. As a rule of thumb, an average room needs roughly 1kW for every 14 cubic metres, so that 3kW suits about 42 cubic metres (around 18 square metres with a 2.4m ceiling). Older, draughty or high-ceilinged rooms need more, and a heat-loss check by your installer gives the right answer.\u003c\/p\u003e\u003cp\u003eThe Passiv is 813mm high, 700mm wide and 486mm deep and weighs 195kg, and it takes logs up to 350mm long.\u003c\/p\u003e\u003cdiv class=\"gf-desc-specs\"\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eWoodfire Passiv\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e4 to 10kW (about 7kW to water, 3kW to room)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEfficiency\u003c\/th\u003e\n\u003ctd\u003e85.8%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFuel\u003c\/th\u003e\n\u003ctd\u003eWood and wood briquettes only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (H x W x D)\u003c\/th\u003e\n\u003ctd\u003e813 x 700 x 486mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e195kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlue\u003c\/th\u003e\n\u003ctd\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal air supply\u003c\/th\u003e\n\u003ctd\u003e100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum log length\u003c\/th\u003e\n\u003ctd\u003e350mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e2.5 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eFreestanding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEcodesign\u003c\/th\u003e\n\u003ctd\u003eYes (Woodfire)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003c\/div\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eIt must be installed by a HETAS-registered installer or signed off by Building Control, and a carbon monoxide alarm is required in the room.\u003c\/p\u003e\u003cp\u003eThe boiler connection should be designed and fitted by a competent heating engineer, including the controls and safety devices the manual calls for.\u003c\/p\u003e\u003cdiv class=\"gf-desc-faq\"\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003ch3\u003eHow much heat goes to the room?\u003c\/h3\u003e\n\u003cp\u003eWoodfire quotes about 3kW to the room and 7kW to water, within a total range of 4 to 10kW.\u003c\/p\u003e\n\u003ch3\u003eDoes it need a flue?\u003c\/h3\u003e\n\u003cp\u003eYes, a 150mm flue suitable for solid fuel. It also has a 100mm connection for an external air supply.\u003c\/p\u003e\n\u003ch3\u003eCan it be used on a pressurised system?\u003c\/h3\u003e\n\u003cp\u003eWoodfire states it can be connected to pressurised or open vented systems, with a heat safety coil fitted as standard.\u003c\/p\u003e\n\u003ch3\u003eWhat size logs does it take?\u003c\/h3\u003e\n\u003cp\u003eLogs up to 350mm long. It is for wood and wood briquettes only.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eSee all \u003ca href=\"\/collections\/boiler-stove\"\u003eboiler stoves\u003c\/a\u003e and \u003ca href=\"\/collections\/wood-burning-stove\"\u003ewood burning stoves\u003c\/a\u003e.\u003c\/p\u003e","brand":"Woodfire","offers":[{"title":"Default Title","offer_id":43290180681982,"sku":"10014540","price":3325.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/4037\/1710\/products\/Woodfire_Passive-min.jpg?v=1660059053"},{"product_id":"woodfire-ex10-inset-boiler-stove","title":"Woodfire EX10 Wood Burning Inset Boiler Stove","description":"\u003cp\u003eThe Woodfire EX10 is the smallest model in the Woodfire EX inset boiler range. Rated at 9.9kW and 84% efficiency, it puts about 8.5kW into water for radiators and hot water and only 1.4kW into the room, which suits a well insulated or low energy home.\u003c\/p\u003e\u003ch2\u003eWhy choose the Woodfire EX10\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e9.9kW nominal output: 8.5kW to water and 1.4kW to the room.\u003c\/li\u003e\n\u003cli\u003e84% efficiency, with Woodfire stating Ecodesign compliance.\u003c\/li\u003e\n\u003cli\u003e200mm top flue outlet and a 125mm external air supply connection; operating pressure 2.5 bar.\u003c\/li\u003e\n\u003cli\u003e3 year warranty when fitted with a load unit or load valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWill it suit your space?\u003c\/h2\u003e\u003cp\u003eWith only 1.4kW reaching the room, it suits rooms that would overheat with an ordinary stove. As a rule of thumb, an average room needs roughly 1kW for every 14 cubic metres, so that 1.4kW suits about 20 cubic metres (around 8 square metres with a 2.4m ceiling). Older, draughty or high-ceilinged rooms need more, and a heat-loss check by your installer gives the right answer.\u003c\/p\u003e\u003cp\u003eThe EX10 is 1107mm high, 634mm wide and 545mm deep and weighs 177kg. Woodfire asks for 400mm clearance to combustibles at the rear and sides and 1000mm in front.\u003c\/p\u003e\u003cdiv class=\"gf-desc-specs\"\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eWoodfire EX10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e9.9kW nominal (8.5kW to water, 1.4kW to room)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEfficiency\u003c\/th\u003e\n\u003ctd\u003e84%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFuel\u003c\/th\u003e\n\u003ctd\u003eWood and wood briquettes only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (H x W x D)\u003c\/th\u003e\n\u003ctd\u003e1107 x 634 x 545mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e177kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlue\u003c\/th\u003e\n\u003ctd\u003e200mm, top outlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal air supply\u003c\/th\u003e\n\u003ctd\u003e125mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum log length\u003c\/th\u003e\n\u003ctd\u003e400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e2.5 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years with a load unit or load valve (1 year without)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003c\/div\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eIt must be installed by a HETAS-registered installer or signed off by Building Control, and a carbon monoxide alarm is required in the room. A competent heating engineer should design the boiler connection. Woodfire requires a load unit or load valve on the boiler circuit; without one the warranty drops from three years to one.\u003c\/p\u003e\u003cdiv class=\"gf-desc-faq\"\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003ch3\u003eHow much heat goes to the room and how much to the heating system?\u003c\/h3\u003e\n\u003cp\u003eWoodfire rates it at about 1.4kW direct to the room and 8.5kW to water, so most of its heat goes into radiators, a cylinder or a thermal store.\u003c\/p\u003e\n\u003ch3\u003eDoes it need a chimney or flue?\u003c\/h3\u003e\n\u003cp\u003eYes, a 200mm flue suitable for solid fuel, connected at the top of the stove.\u003c\/p\u003e\n\u003ch3\u003eWhat size logs does it take?\u003c\/h3\u003e\n\u003cp\u003eLogs up to 400mm long. Woodfire specifies wood and wood briquettes only.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eSee all \u003ca href=\"\/collections\/boiler-stove\"\u003eboiler stoves\u003c\/a\u003e and \u003ca href=\"\/collections\/wood-burning-stove\"\u003ewood burning stoves\u003c\/a\u003e, and add the \u003ca href=\"\/products\/lk-810-thermomat-2-0g-load-unit\"\u003eLK 810 ThermoMat load unit\u003c\/a\u003e for the boiler circuit.\u003c\/p\u003e","brand":"Woodfire","offers":[{"title":"Default Title","offer_id":43291148026110,"sku":"601634","price":3299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/4037\/1710\/products\/WoodfireEXInteriorShot-min.jpg?v=1660075302"},{"product_id":"woodfire-ex15-inset-boiler-stove","title":"Woodfire EX15 Wood Burning Inset Boiler Stove","description":"\u003cp\u003eThe Woodfire EX15 is the middle model in the Woodfire EX inset boiler range. Rated at 14.9kW and 83% efficiency, it sends about 12.5kW to water for radiators and hot water and 2.4kW into the room, which suits a mid-sized, well insulated home heated mainly through its radiators.\u003c\/p\u003e\u003ch2\u003eWhy choose the Woodfire EX15\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e14.9kW nominal output: 12.5kW to water and 2.4kW to the room.\u003c\/li\u003e\n\u003cli\u003e83% efficiency, with Woodfire stating Ecodesign compliance.\u003c\/li\u003e\n\u003cli\u003eSame 634mm wide body as the EX10 and EX22, with a mid-range water output.\u003c\/li\u003e\n\u003cli\u003e200mm top flue outlet and a 125mm external air supply connection; operating pressure 2.5 bar.\u003c\/li\u003e\n\u003cli\u003e3 year warranty when fitted with a load unit or load valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWill it suit your space?\u003c\/h2\u003e\u003cp\u003eAt 2.4kW, the direct room heat is gentle. As a rule of thumb, an average room needs roughly 1kW for every 14 cubic metres, so that 2.4kW suits about 34 cubic metres (around 14 square metres with a 2.4m ceiling). Older, draughty or high-ceilinged rooms need more, and a heat-loss check by your installer gives the right answer.\u003c\/p\u003e\u003cp\u003eThe EX15 is 1107mm high, 634mm wide and 545mm deep and weighs 179kg. Woodfire asks for 400mm clearance to combustibles at the rear and sides and 1000mm in front.\u003c\/p\u003e\u003cdiv class=\"gf-desc-specs\"\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eWoodfire EX15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e14.9kW nominal (12.5kW to water, 2.4kW to room)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEfficiency\u003c\/th\u003e\n\u003ctd\u003e83%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFuel\u003c\/th\u003e\n\u003ctd\u003eWood and wood briquettes only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (H x W x D)\u003c\/th\u003e\n\u003ctd\u003e1107 x 634 x 545mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e179kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlue\u003c\/th\u003e\n\u003ctd\u003e200mm, top outlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal air supply\u003c\/th\u003e\n\u003ctd\u003e125mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum log length\u003c\/th\u003e\n\u003ctd\u003e400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e2.5 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years with a load unit or load valve (1 year without)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003c\/div\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eIt must be installed by a HETAS-registered installer or signed off by Building Control, and a carbon monoxide alarm is required in the room. A competent heating engineer should design the boiler connection. Woodfire requires a load unit or load valve on the boiler circuit; without one the warranty drops from three years to one.\u003c\/p\u003e\u003cdiv class=\"gf-desc-faq\"\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003ch3\u003eHow much heat goes to the room and how much to the heating system?\u003c\/h3\u003e\n\u003cp\u003eWoodfire rates it at about 2.4kW direct to the room and 12.5kW to water, so most of its heat goes into radiators, a cylinder or a thermal store.\u003c\/p\u003e\n\u003ch3\u003eDoes it need a chimney or flue?\u003c\/h3\u003e\n\u003cp\u003eYes, a 200mm flue suitable for solid fuel, connected at the top of the stove.\u003c\/p\u003e\n\u003ch3\u003eWhat size logs does it take?\u003c\/h3\u003e\n\u003cp\u003eLogs up to 400mm long. Woodfire specifies wood and wood briquettes only.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eSee all \u003ca href=\"\/collections\/boiler-stove\"\u003eboiler stoves\u003c\/a\u003e and \u003ca href=\"\/collections\/wood-burning-stove\"\u003ewood burning stoves\u003c\/a\u003e, and add the \u003ca href=\"\/products\/lk-810-thermomat-2-0g-load-unit\"\u003eLK 810 ThermoMat load unit\u003c\/a\u003e for the boiler circuit.\u003c\/p\u003e","brand":"Woodfire","offers":[{"title":"Default Title","offer_id":43291187970302,"sku":"601636","price":3399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/4037\/1710\/products\/WoodfireEXInteriorShot-min_c4a6e01e-c9f3-4967-9bb0-47fa727fae6f.jpg?v=1660075601"},{"product_id":"woodfire-ex22-inset-boiler-stove","title":"Woodfire EX22 Wood Burning Inset Boiler Stove","description":"\u003cp\u003eThe Woodfire EX22 is the largest stove in the Woodfire EX inset boiler range, rated at 21.8kW. Almost all of that, about 18.5kW, goes to water for radiators, hot water or a thermal store, with 3.3kW into the room, so it can act as the main heat source in a larger home.\u003c\/p\u003e\u003ch2\u003eWhy choose the Woodfire EX22\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e21.8kW nominal output: 18.5kW to water and 3.3kW to the room.\u003c\/li\u003e\n\u003cli\u003e82% efficiency, with Woodfire stating Ecodesign compliance.\u003c\/li\u003e\n\u003cli\u003eThe most water output in the EX range, for larger heating systems.\u003c\/li\u003e\n\u003cli\u003e200mm top flue outlet and a 125mm external air supply connection; operating pressure 2.5 bar.\u003c\/li\u003e\n\u003cli\u003e3 year warranty when fitted with a load unit or load valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWill it suit your space?\u003c\/h2\u003e\u003cp\u003eOnly 3.3kW reaches the room directly, so the fire will not overheat the space it sits in. As a rule of thumb, an average room needs roughly 1kW for every 14 cubic metres, so that 3.3kW suits about 46 cubic metres (around 19 square metres with a 2.4m ceiling). Older, draughty or high-ceilinged rooms need more, and a heat-loss check by your installer gives the right answer.\u003c\/p\u003e\u003cp\u003eThe EX22 is 1107mm high, 634mm wide and 545mm deep and weighs 181kg. Woodfire asks for 400mm clearance to combustibles at the rear and sides and 1000mm in front.\u003c\/p\u003e\u003cdiv class=\"gf-desc-specs\"\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eWoodfire EX22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e21.8kW nominal (18.5kW to water, 3.3kW to room)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEfficiency\u003c\/th\u003e\n\u003ctd\u003e82%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFuel\u003c\/th\u003e\n\u003ctd\u003eWood and wood briquettes only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (H x W x D)\u003c\/th\u003e\n\u003ctd\u003e1107 x 634 x 545mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e181kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlue\u003c\/th\u003e\n\u003ctd\u003e200mm, top outlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal air supply\u003c\/th\u003e\n\u003ctd\u003e125mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum log length\u003c\/th\u003e\n\u003ctd\u003e400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e2.5 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years with a load unit or load valve (1 year without)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003c\/div\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eIt must be installed by a HETAS-registered installer or signed off by Building Control, and a carbon monoxide alarm is required in the room. A competent heating engineer should design the boiler connection. Woodfire requires a load unit or load valve on the boiler circuit; without one the warranty drops from three years to one.\u003c\/p\u003e\u003cdiv class=\"gf-desc-faq\"\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003ch3\u003eHow much heat goes to the room and how much to the heating system?\u003c\/h3\u003e\n\u003cp\u003eWoodfire rates it at about 3.3kW direct to the room and 18.5kW to water, so most of its heat goes into radiators, a cylinder or a thermal store.\u003c\/p\u003e\n\u003ch3\u003eDoes it need a chimney or flue?\u003c\/h3\u003e\n\u003cp\u003eYes, a 200mm flue suitable for solid fuel, connected at the top of the stove.\u003c\/p\u003e\n\u003ch3\u003eWhat size logs does it take?\u003c\/h3\u003e\n\u003cp\u003eLogs up to 400mm long. Woodfire specifies wood and wood briquettes only.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eSee all \u003ca href=\"\/collections\/boiler-stove\"\u003eboiler stoves\u003c\/a\u003e and \u003ca href=\"\/collections\/wood-burning-stove\"\u003ewood burning stoves\u003c\/a\u003e, and add the \u003ca href=\"\/products\/lk-810-thermomat-2-0g-load-unit\"\u003eLK 810 ThermoMat load unit\u003c\/a\u003e for the boiler circuit.\u003c\/p\u003e","brand":"Woodfire","offers":[{"title":"Default Title","offer_id":43291193606398,"sku":"601638","price":3499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/4037\/1710\/products\/WoodfireEXInteriorShot-min_bf65ac15-d87f-4b17-8910-299d99b59386.jpg?v=1660075772"},{"product_id":"woodfire-ex12-panorama-wood-burning-inset-boiler-strove","title":"Woodfire EX12 Panorama Wood Burning Inset Boiler Stove | One or Double Sided","description":"\u003cp\u003eThe Woodfire EX12 Panorama is a wood-only inset boiler stove for heating radiators and hot water from a log fire. It comes one sided, rated 11.9kW, or double sided, rated 12.5kW, with glass on both faces so the fire can be seen from two rooms.\u003c\/p\u003e\u003ch2\u003eWhy choose the Woodfire EX12 Panorama\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMost of the heat goes to water: 7.5kW (one sided) or 6.5kW (double sided).\u003c\/li\u003e\n\u003cli\u003eTakes logs up to 600mm long.\u003c\/li\u003e\n\u003cli\u003e200mm top flue outlet and a 125mm external air supply connection.\u003c\/li\u003e\n\u003cli\u003eWoodfire states Ecodesign compliance; 3 year warranty with a load unit or load valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWill it suit your space?\u003c\/h2\u003e\u003cp\u003eRoom heat is 4.4kW one sided, or 6.0kW shared between two rooms double sided. As a rule of thumb, an average room needs roughly 1kW for every 14 cubic metres, so the one sided model's 4.4kW suits about 62 cubic metres (around 26 square metres with a 2.4m ceiling). Older, draughty or high-ceilinged rooms need more, and a heat-loss check by your installer gives the right answer.\u003c\/p\u003e\u003cp\u003eWoodfire asks for 400mm clearance to combustibles at the rear and sides and 1000mm in front.\u003c\/p\u003e\u003cdiv class=\"gf-desc-specs\"\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eWoodfire EX12 Panorama (one sided) \/ EX12 Panorama DS (double sided)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e11.9kW: 7.5kW water, 4.4kW room (one sided) \/ 12.5kW: 6.5kW water, 6.0kW rooms (double sided)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEfficiency\u003c\/th\u003e\n\u003ctd\u003e81% (one sided) \/ 85% (double sided)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFuel\u003c\/th\u003e\n\u003ctd\u003eWood and wood briquettes only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (H x W x D)\u003c\/th\u003e\n\u003ctd\u003e1100 x 823 x 532mm (one sided) \/ 1100 x 838 x 558mm (double sided)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e280kg (one sided) \/ 253kg (double sided)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlue\u003c\/th\u003e\n\u003ctd\u003e200mm, top outlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal air supply\u003c\/th\u003e\n\u003ctd\u003e125mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum log length\u003c\/th\u003e\n\u003ctd\u003e600mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years with a load unit or load valve (1 year without)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003c\/div\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eIt must be installed by a HETAS-registered installer or signed off by Building Control, and a carbon monoxide alarm is required in the room. A competent heating engineer should design the boiler connection. Woodfire requires a load unit or load valve on the boiler circuit; without one the warranty drops from three years to one.\u003c\/p\u003e\u003cdiv class=\"gf-desc-faq\"\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the one sided and double sided versions?\u003c\/h3\u003e\n\u003cp\u003eThe double sided version has glass on both faces for a dividing wall. It gives 12.5kW against 11.9kW, with more heat to the rooms, and is slightly wider and deeper.\u003c\/p\u003e\n\u003ch3\u003eDoes it need a chimney or flue?\u003c\/h3\u003e\n\u003cp\u003eYes, a 200mm flue suitable for solid fuel, connected at the top of the stove.\u003c\/p\u003e\n\u003ch3\u003eWhat size logs does it take?\u003c\/h3\u003e\n\u003cp\u003eLogs up to 600mm long. Wood and wood briquettes only.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eSee all \u003ca href=\"\/collections\/boiler-stove\"\u003eboiler stoves\u003c\/a\u003e and \u003ca href=\"\/collections\/wood-burning-stove\"\u003ewood burning stoves\u003c\/a\u003e, and add the \u003ca href=\"\/products\/lk-810-thermomat-2-0g-load-unit\"\u003eLK 810 ThermoMat load unit\u003c\/a\u003e for the boiler circuit.\u003c\/p\u003e","brand":"Woodfire","offers":[{"title":"One Sided","offer_id":55666754650498,"sku":"601641","price":3999.0,"currency_code":"GBP","in_stock":true},{"title":"Double Sided","offer_id":55666754683266,"sku":"601642","price":4699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/4037\/1710\/products\/Woodfire-EX-17-Pano-bw-Web-min.jpg?v=1660081346"},{"product_id":"woodfire-ex17-panorama-wood-burning-inset-boiler-strove","title":"Woodfire EX17 Panorama Wood Burning Inset Boiler Stove | One or Double Sided","description":"\u003cp\u003eThe Woodfire EX17 Panorama is a wood-only inset boiler stove that heats your radiators and hot water as well as the room. Choose the one sided version, rated 16.8kW, or the double sided version, rated 17.6kW, with glass on both faces for a wall between two rooms.\u003c\/p\u003e\u003ch2\u003eWhy choose the Woodfire EX17 Panorama\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHeat to water for radiators and hot water: 10.0kW (one sided) or 8.7kW (double sided).\u003c\/li\u003e\n\u003cli\u003eTakes logs up to 600mm long.\u003c\/li\u003e\n\u003cli\u003e200mm top flue outlet and a 150mm external air supply connection.\u003c\/li\u003e\n\u003cli\u003eWoodfire states Ecodesign compliance; 3 year warranty with a load unit or load valve.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWill it suit your space?\u003c\/h2\u003e\u003cp\u003eRoom heat is 6.8kW one sided, or 8.9kW shared between two rooms double sided. As a rule of thumb, an average room needs roughly 1kW for every 14 cubic metres, so the one sided model's 6.8kW suits about 95 cubic metres (around 40 square metres with a 2.4m ceiling). Older, draughty or high-ceilinged rooms need more, and a heat-loss check by your installer gives the right answer.\u003c\/p\u003e\u003cp\u003eWoodfire asks for 400mm clearance to combustibles at the rear and sides and 1000mm in front.\u003c\/p\u003e\u003cdiv class=\"gf-desc-specs\"\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eWoodfire EX17 Panorama (one sided) \/ EX17 Panorama DS (double sided)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e16.8kW: 10.0kW water, 6.8kW room (one sided) \/ 17.6kW: 8.7kW water, 8.9kW rooms (double sided)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEfficiency\u003c\/th\u003e\n\u003ctd\u003e83% (one sided) \/ 82% (double sided)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFuel\u003c\/th\u003e\n\u003ctd\u003eWood and wood briquettes only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (H x W x D)\u003c\/th\u003e\n\u003ctd\u003e1100 x 823 x 532mm (one sided) \/ 1100 x 838 x 558mm (double sided)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e280kg (one sided) \/ 253kg (double sided)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlue\u003c\/th\u003e\n\u003ctd\u003e200mm, top outlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal air supply\u003c\/th\u003e\n\u003ctd\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum log length\u003c\/th\u003e\n\u003ctd\u003e600mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years with a load unit or load valve (1 year without)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003c\/div\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eIt must be installed by a HETAS-registered installer or signed off by Building Control, and a carbon monoxide alarm is required in the room. A competent heating engineer should design the boiler connection. Woodfire requires a load unit or load valve on the boiler circuit; without one the warranty drops from three years to one.\u003c\/p\u003e\u003cdiv class=\"gf-desc-faq\"\u003e\n\u003ch2\u003eQuestions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the one sided and double sided versions?\u003c\/h3\u003e\n\u003cp\u003eThe double sided version has glass on both faces so it can sit in a dividing wall. It gives 17.6kW against 16.8kW, with more heat to the rooms, and is slightly wider and deeper.\u003c\/p\u003e\n\u003ch3\u003eDoes it need a chimney or flue?\u003c\/h3\u003e\n\u003cp\u003eYes, a 200mm flue suitable for solid fuel, connected at the top of the stove.\u003c\/p\u003e\n\u003ch3\u003eWhat size logs does it take?\u003c\/h3\u003e\n\u003cp\u003eLogs up to 600mm long. Wood and wood briquettes only.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eSee all \u003ca href=\"\/collections\/boiler-stove\"\u003eboiler stoves\u003c\/a\u003e and \u003ca href=\"\/collections\/wood-burning-stove\"\u003ewood burning stoves\u003c\/a\u003e, and add the \u003ca href=\"\/products\/lk-810-thermomat-2-0g-load-unit\"\u003eLK 810 ThermoMat load unit\u003c\/a\u003e for the boiler circuit.\u003c\/p\u003e","brand":"Woodfire","offers":[{"title":"One Sided","offer_id":55666759860610,"sku":"601642","price":4299.0,"currency_code":"GBP","in_stock":true},{"title":"Double Sided","offer_id":55666759893378,"sku":"601643","price":4899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/4037\/1710\/products\/Woodfire-EX-17-Pano-bw-Web-min_845d7d52-0c39-45d6-88f2-25c200ef938a.jpg?v=1660081366"}],"url":"https:\/\/www.glowingflames.co.uk\/collections\/woodfire-stoves.oembed","provider":"Glowing Flames","version":"1.0","type":"link"}