Ekofires
Ekofires 3010 and 3015 Slimline Inset Gas Fire
From£279.00
- 3.1kW
- Gas
Free delivery to England and Wales
Adam Colorado Inset Electric Fire
Black
£179.00
Skip to product information
Compare all options
Adam
Is it right for you?
- Chimney: none needed. It runs on mains electricity, with no gas or flue.
- Fitting: goes into a recess or chamber built to the sizes in the manual.
Your selection
- Finish
- Black
- Dimensions
- H 593 x W 507 x D 148 mm
- Inset dimensions
- H 555mm x W 405mm x D 108mm (58mm with spacer)
- Weight
- 8.5kg
- Heat output
- 1kW to 2kW
- Glass fronted
- Yes
More details
- Power
- Plug and play
- Material
- Steel
- Finish details
- Black
- Controls
- Manual
- Flame effect
- LED flame effect, coal effect fuel bed
- Thermostat
- Yes
- Plug position
- Left side, viewed from the front
- Flame without heat
- Yes
Free delivery to England and WalesUsually 3 to 7 working days. Scotland and Northern Ireland charges are shown at checkout.
- 30 days to change your mind
- Manufacturer's UK warranty
- UK suppliers
- 2kWHeat output
- ElectricalFuel
The Adam Colorado is an inset electric fire with an LED flame over a coal effect fuel bed. It gives 1kW or 2kW with a thermostat, plugs into a standard socket and needs no chimney. It fits a recess 555 mm high, 405 mm wide and 108 mm deep, and comes in black or brushed steel.
Key features
- 1kW or 2kW heat output with a thermostat.
- LED flame effect over a coal effect fuel bed, and the flame can run without heat.
- Black or brushed steel finish.
- Plug and play: plugs into a standard socket, no chimney or flue needed.
- Inset depth of 108mm, or 58mm with the Adam V2 spacer.
What you'll need
What you need to know before you buy
No chimney, flue or gas needed. Here's what to check before you order.
Fitting
It runs on mains electricity. Check the specifications for how it connects; if it needs wiring into a fused spur, use a qualified electrician.
Inset fires go into a recess or chamber built to the sizes in the manual, so measure before you order.
How buying it works
- Check the sizeCompare the dimensions in the specifications with your space.
- We deliverFree to England and Wales on orders over £50.
- Set it upFollow the manual.
The numbers, in plain English
- H 593 x W 507 x D 148 mm
- Size (height x width x depth)
Full specifications, clearances and the manual are further down the page.
About this product
Will it suit your space?
As a rough guide, allow 1kW of heat for every 14 cubic metres of room volume in an average room, so 2kW suits a room of around 28 cubic metres (about 3.4 x 3.4 m with a 2.4 m ceiling). Older, draughty or high-ceilinged rooms need more, and a heat-loss check by a heating engineer gives the right answer.
Check the recess before ordering: 555 mm high, 405 mm wide and 108 mm deep. The fire's front measures 593 x 507 mm, and the plug must stay reachable once it is fitted. See the sizes table below for full dimensions.
Sizes and options
| Finish | Heat output |
|---|---|
| Black | 1kW to 2kW |
| Brushed steel | 1kW or 2kW |
Specifications
| Brand | Adam |
|---|---|
| Fuel | Electric |
| Installation | Inset |
| Finish details | Black (Black); Brushed steel (Brushed steel) |
Installation and safety
No chimney or flue is needed. Fit it into a suitable recess or surround and plug it into a standard socket. Fit and use it as set out in the instruction manual, which gives the clearances and any recess or wall requirements. If the fire is hardwired or built into a wall, have the electrical work done by a qualified electrician.
Questions
Can I plug it in?
Yes, it is listed as plug and play. The plug must stay accessible after installation so the fire can be isolated in an emergency, so it must not be plugged in anywhere behind the fire or surround.
What size recess does it need?
555 mm high, 405 mm wide and 108 mm deep, or 58mm deep with a spacer attached. The whole fire measures 593mm high, 507mm wide and 148mm deep.
How much heat does it give?
1kW or 2kW with a thermostat, plus a flame effect only setting.
Can I use the flame without heat?
Yes. The first setting is the flame effect only, so you can enjoy the flames without heat.
Does it need a chimney?
No. It plugs into a standard socket; no flue is needed.
Is it glass fronted?
The black version is listed as glass fronted and made from steel.
Browse more inset electric fires, marble fireplaces or fire surrounds.
You may also like
More from Slimline Gas & Electric Fires
Ekofires
Ekofires 4010 and 4015 Slimline High Efficiency Inset Gas Fire
From£509.00
- 4kW
- Gas
Free delivery to England and Wales
Ekofires
Ekofires 1070 Reflections - Inset Electric Fire - Slimline High Efficiency
£360.00
- 2kW
- Electrical
Free delivery to England and Wales
Ekofires
Ekofires 1060 LED - Inset Electric Fire - Slimline High Efficiency
£304.00
- 2kW
- Electrical
Free delivery to England and Wales
Why buy from Glowing Flames?
-
Free delivery
Free to England and Wales on orders over £50 (£9.99 below that). Large items come on a pallet and the courier books a day with you.
-
Real advice
Not sure it will fit or work with your chimney? Send us a photo and we will check.
-
UK warranties
Supplied by the manufacturer or its UK distributor, with the manufacturer’s UK warranty and spares.
-
30 days to change your mind
Change your mind up to 30 days after delivery, with no restocking fees and fixed collection prices for large items.