Woodfire
Woodfire CX8 Contemporary Wood Burning Boiler Stove
From£2,199.00RRP £2,400.00
- 8kW
- Wood Burning
Free delivery to England and Wales
Woodfire EX Wood Burning Inset Boiler Stove
EX10
Our price
£3,299.00
RRP
£3,650.00
Skip to product information
Woodfire
This is a boiler stove
Most of its heat goes into your radiators and hot water. It connects to your central heating, so you need a heating engineer as well as a stove installer.
Is it right for you?
- Chimney: fits into a fireplace opening with a chimney, which will usually need a liner.
- Fuel: dry logs only.
- Fitting: must be fitted by a HETAS registered installer, plus a heating engineer for the pipework. Find one by postcode
Add these with your stove
Nothing is ticked for you. Tick what you need and it goes in the basket with the stove. Your installer will confirm the flue parts.
Your selection
- Model
- EX10
- Weight
- 177kg
- Heat output
- 9.9kW nominal (8.5kW to water, 1.4kW to room)
- Efficiency
- 84%
Free delivery to England and WalesUsually 3 to 10 working days. The courier usually contacts you to book a day. Scotland and Northern Ireland charges are shown at checkout.
- 30 days to change your mind
- Manufacturer's UK warranty
- UK suppliers
- Wood BurningFuel
- Ecodesign2022 compliant
- 3 yearsWarranty
The Woodfire EX is a wood burning inset boiler stove that sends most of its heat to water for radiators, hot water or a thermal store, with a smaller share into the room. All three models share the same 634mm wide body, a 200mm top flue outlet and wood-only fuel. Choose the EX10 (10kW), EX15 (15kW) or EX22 (22kW), from a well insulated or low energy home up to the main heat source in a larger home.
Why choose the Woodfire EX
- 10kW to 22kW in total, with 8.5kW to 18.5kW going to water and 1.5kW to 3.1kW to the room.
- 82% to 84% efficiency depending on model, with Woodfire stating Ecodesign compliance.
- Same 634mm wide body across the EX10, EX15 and EX22.
- 200mm top flue outlet and a 125mm external air supply connection; operating pressure 2.5 bar.
- Takes logs up to 400mm long; wood and wood briquettes only.
- 3 year warranty when fitted with a load unit or load valve and installed by a qualified fitter (1 year otherwise).
What you'll need
Everything to get this stove lit
A stove on its own isn't enough. Here's what comes in the box, what else you'll need, and what your installer brings.
In the box
- The stove and the manufacturer's installation and user manual
You'll also need
- A carbon monoxide alarm. Required by law in the room with the stove.
- Stove pipe to connect it to the flue. Your installer will tell you the length.
- A hearth for it to stand on, if you don't already have one.
- A load unit for the heating circuit, fitted by your heating engineer.
- A chimney liner or twin-wall flue. Your installer supplies this.
Added. It goes in your basket with the stove when you press Add to basket.
Your installer brings
A liner sized to the stove, fitted up your chimney, after the chimney has been swept and checked.
Fitting, testing and a certificate showing it meets Building Regulations. Keep it for your home insurer and for when you sell.
A boiler stove also needs a heating engineer to connect it to your radiators and hot water, with the safety parts the stove's manual lists.
Ask for one quote that covers the survey, flue, fitting and certificate. Using someone who isn't HETAS registered? Your local building control must approve the work before you use the stove.
Find a HETAS installer by postcode Got your installer's parts list? Email it and we'll price what we sell How flues and installation work
How buying a stove works
- Check it fitsUse our size calculator, or email us a photo of your fireplace and the room size and we'll suggest stoves that suit.
- Book a HETAS installerThey survey the chimney, quote for the flue and fitting, and tell you which parts to order.
- We deliverFree to England and Wales, usually within 3 to 10 working days. Book the fitting date once it has arrived.
- Your installer fits itThey fit the stove and CO alarm, test it and register it. You get a certificate to keep.
The numbers, in plain English
- 200mm flue
- The flue size your installer needs
- 40cm logs
- The longest log it takes
- H 1107 x W 634 x D 545 mm
- Size (height x width x depth)
Full specifications, clearances and the manual are further down the page.
About this product
Will it suit your space?
Only a small part of the output reaches the room directly, so these stoves suit rooms that would overheat with an ordinary stove. As a rule of thumb, an average room needs roughly 1kW for every 14 cubic metres, so the direct room heat of 1.5kW to 3.1kW suits roughly 21 to 43 cubic metres depending on model. Older, draughty or high-ceilinged rooms need more, and a heat-loss check by your installer gives the right answer. Every model is 1107mm high, 634mm wide and 545mm deep; check the sizes table below for the output and weight of each. Woodfire asks for 400mm clearance to combustibles at the rear and sides and 1000mm in front.
Sizes and options
| Model | Weight | Heat output |
|---|---|---|
| EX10 | 177kg | 9.9kW nominal (8.5kW to water, 1.4kW to room) |
| EX15 | 179kg | 14.9kW nominal (12.5kW to water, 2.4kW to room) |
| EX22 | 181kg | 21.8kW nominal (18.5kW to water, 3.3kW to room) |
Specifications
| Brand | Woodfire |
|---|---|
| Fuel | Wood and wood briquettes only |
| Dimensions (H x W x D) | 1107 x 634 x 545mm |
| Flue | 200mm, top outlet |
| External air supply | 125mm |
| Maximum log length | 400mm |
| Operating pressure | 2.5 bar |
| Warranty | 3 years with a load unit or load valve, installed by a qualified fitter (1 year otherwise) |
| Efficiency | 84% (EX10); 83% (EX15); 82% (EX22) |
Installation and safety
It must be installed by a HETAS-registered installer or signed off by Building Control, and a carbon monoxide alarm is required in the room. A competent heating engineer should design the boiler connection. Woodfire requires a load unit or load valve on the boiler circuit; without one, or without installation by a qualified fitter, the warranty drops from three years to one.
Questions
How much heat goes to the room and how much to the heating system?
Most of the heat goes into radiators, a cylinder or a thermal store. Woodfire rates the EX10 at about 1.5kW to the room and 8.5kW to water, the EX15 at 2.5kW and 12.5kW, and the EX22 at 3.1kW and 18.5kW.
Does it need a chimney or flue?
Yes, a 200mm flue suitable for solid fuel, connected at the top of the stove.
What size logs does it take?
Logs up to 400mm long. Woodfire specifies wood and wood briquettes only.
You may also like
More from Woodfire Stoves
Woodfire
Woodfire EX Panorama Wood Burning Inset Boiler Stove
From£3,999.00RRP £4,485.00
- Wood Burning
Free delivery to England and Wales
Why buy from Glowing Flames?
-
Free delivery
Free to England and Wales on orders over £50 (£9.99 below that). Large items come on a pallet and the courier books a day with you.
-
Real advice
Not sure it will fit or work with your chimney? Send us a photo and we will check.
-
UK warranties
Supplied by the manufacturer or its UK distributor, with the manufacturer’s UK warranty and spares.
-
30 days to change your mind
Change your mind up to 30 days after delivery, with no restocking fees and fixed collection prices for large items.