Opus
Opus Calypso Wood Burning Boiler Stove
£3,485.00
- 8.3kW
- Wood Burning
Free delivery to England and Wales
Opus
This is a boiler stove
Most of its heat goes into your radiators and hot water. It connects to your central heating, so you need a heating engineer as well as a stove installer.
Is it right for you?
The Opus Calypso G is the glass door version of Opus's Calypso boiler stove. It gives 8.3kW in total, 3.4kW to the room and 4.9kW to water for hot water and radiators, at 83.9% efficiency. The Calypso G SE is exempt for use in smoke control areas in England when burning approved fuel.
Why choose the Opus Calypso G
What you'll need
A stove on its own isn't enough. Here's what comes in the box, what else you'll need, and what your installer brings.
Added. It goes in your basket with the stove when you press Add to basket.
A stainless steel liner sized to the stove and a register plate to seal the chimney, usually after the chimney has been swept and checked.
A twin-wall insulated flue, taken up through the ceiling and roof or up an outside wall.
Fitting, testing and a certificate showing it meets Building Regulations. Keep it for your home insurer and for when you sell.
A boiler stove also needs a heating engineer to connect it to your radiators and hot water, with the safety parts the stove's manual lists.
Ask for one quote that covers the survey, flue, fitting and certificate. Using someone who isn't HETAS registered? Your local building control must approve the work before you use the stove.
Find a HETAS installer by postcode Got your installer's parts list? Email it and we'll price what we sell How flues and installation work
Full specifications, clearances and the manual are further down the page.
About this product
With only 3.4kW going into the room, the Calypso suits well-insulated homes; Opus says it should cover a good share of the heat and hot water in a well-insulated small to medium house. Your installer's heat-loss check will confirm the size.
It stands 1166mm tall, 565mm wide and 462mm deep, takes a 150mm top flue, and needs 150mm to combustible materials behind and 200mm at the sides.
| Model | Opus Calypso G / Calypso G SE |
|---|---|
| Heat output | 8.3kW nominal (3.4kW to the room, 4.9kW to water) |
| Efficiency | 83.9%, energy class A+ |
| Fuel | Wood logs only, up to 330mm long |
| Dimensions | H 1166 x W 565 x D 462mm |
| Flue | 150mm, top outlet only (centre 196mm from the back) |
| Water system | Supplied pre-plumbed; open-vented or pressurised systems |
| Clearance to combustibles | 150mm rear, 200mm sides |
| Ecodesign | Ecodesign ready |
| Smoke control | Calypso G SE exempt in England on wood logs; Calypso G not exempt |
| Warranty | 3 years (1 year without a load unit or load valve) |
Have it fitted by a HETAS-registered installer or signed off by Building Control, with a carbon monoxide alarm in the same room.
A competent installer must connect the water side. Opus cuts its warranty to 1 year on boiler models without a load unit or load valve, so include one.
Only the Calypso G SE. DEFRA lists the Opus Calypso Boiler Stove as exempt in England for wood logs when fitted with a permanent secondary air stop, which is the SE version. The Calypso G is not exempt.
Yes. It suits both open-vented and pressurised systems.
The G has a full-height glass door. Output, efficiency and size are the same.
See more boiler stoves, Opus stoves and DEFRA approved stoves, or the standard Opus Calypso.
Free to England and Wales on orders over £50 (£9.99 below that). Large items come on a pallet and the courier books a day with you.
Not sure it will fit or work with your chimney? Send us a photo and we will check.
Supplied by the manufacturer or its UK distributor, with the manufacturer’s UK warranty and spares.
Change your mind up to 30 days after delivery, with no restocking fees and fixed collection prices for large items.